Walbro K2-wyta Spiral Diaphragm Upgrade Kit
Brand: GASPARES
SKU: K2-WYTA
BOPE Price
$75.00
Availability: Out of Stock
Items listed as available may not be physically in store but
available at our suppliers warehouse.
Please call us to find out if this item is available in store now.
available at our suppliers warehouse.
Please call us to find out if this item is available in store now.
Walbro K2-wyta Spiral Diaphragm Upgrade Kit
Features
| the top to hold it down. | |
| 6. Install the four screws and start them by just one turn each. | |
| 7. Then remove the clip off the end and pull the installation sleeve out, then | |
| torque the screws down normally. | |
| Footnote: | When comparing this fitment application information to your carburettor model |
| please disregard all letters (A, B, C) and -1 that may be at the end of your | |
| carburetor model number. | |
| Brand: | Genuine Walbro, |
| Product Line: | Diaphragm and Gasket Set, Gasket and Diaphragm Set, Metering Diaphragm and Gasket |
| kit - Spiral, Spiral Metering Diaphragm and Gasket Set, | |
| 5. Hold the installation sleeve with one hand and put the metering cover on over | |
| sure that the word "TOP" printed on the installation sleeve is facing up). | |
| inside the installation sleeve (Important - install onto the two metal pins, making | |
| set the lever height is below the word "Spiral". | |
| 4. Install the new gaskets and diaphragm onto the carburettor while still contained | |
| adjustment point on the brass gauge is on the bottom, the indentation you need to | |
| part number OMK500-528 which is included in this spiral diaphragm kit. The | |
| 3. Reset the metering lever height using the updated version of the brass "W" gauge | |
| 1. Remove metering cover, old diaphragm and gasket. | |
| 2. Remove the metering lever and replace with the new one supplied, reusing the old | |
| metering lever pin. | |
| Note: | Fitting instructions - |
| "W" gauge use our part number K7-WYTA . | |
| old metering lever pin. For a 5-pack version of this upgrade kit without the brass | |
| it. The metering lever must be replaced with the new one supplied, please reuse the | |
| stainless steel spiral is more forgiving but care is still required when handling | |
| Standard Pack Quantity: | 1 |
| Please Note: | Warning - These parts are extremely durable inside the carburettor but fragile to |
| handle - DO NOT bend or crease the membrane when handling or during assembly! The | |
| to make assembly quicker and easier (refer to notes below). | |
| All parts (except the metering lever) are contained in a clever installation sleeve | |
| use the new spiral diaphragm kits. | |
| Currently over 500 Walbro diaphragm carburettor model numbers can be upgraded to | |
| in modern fuels. | |
| spiral diaphragm - impervious to the effects of Ethanol and other additives found | |
| WTEA-6, WTEA-7, WTEA-8, WTEA-9 and WTEA-10-1. Please refer to the notes below. | |
| Features: | A membrane with a high grade teflon film in the centre and a stainless steel |
| to WTE-1, WTE-6, WTE-11, WTE-13, WTE-19, WTE-21, WTEA-2, WTEA-3, WTEA-4, WTEA-5, | |
| suitable for use with selected Walbro carburettor models including but not limited | |
| Fits: | This genuine Walbro K2-WYTA spiral metering diaphragm and gasket upgrade kit is |
| Replaces OEM: | Walbro K2-WYTA |
| compliant spiral metering diaphragm. The new spiral metering diaphragm is | |
| impervious to the effects of Ethanol and additives in modern fuels and does not | |
| deteriorate with age. | |
| Gauge | |
| Editorial: | Walbro's patented spiral metering diaphragm upgrade kit allows you to convert your |
| carburettor from the traditional rubber metering diaphragm to Walbro's ethanol | |
| Description: | Genuine Walbro K2-WYTA Spiral Metering Diaphragm Upgrade Kit - Includes Brass "W" |
